Enchanced External Counterpulsation Machines (EECP)

• Product Name:

  Enchanced External Counterpulsation Machines (EECP)

• Category: Medical devices/General Hospital Devices
• Package: Wooden Case
• Price: Get Latest Price

• Product Detials:EECP TI MACHINES:
  PSK-HEALTH ECP -TI with SpO2
  1. It adopts integration of machinery (All-in-one) design which makes the operation more reasonable and the installation more convenient.
  2. It is more comfortable as the bed is designed based on the principle of human engineering. It makes the treatment more easily. 3. It adopts modern industrial design which makes the appearance of product luxury and gracious.
  4. The air compressor adopted in the machine is Becker sliding vane rotary vacuum pump which is made in Germany and is full of gas, low noise and light.
  5. It adopts the German Siemens inverter which is good at speed regulating, automatically traced on the basis of the patients ECG data, controls the gas production of the air compressor in real-time so as to conserve energy and protect environmental in maximum. 6. The angle of the backrest can be adjusted on the basis of patient's physiological situation.
  7. All the indexes of product have passed the strict test of EU, and have got the CE Certificate.
  8. It adopts the electromagnetic valve with independent intellectual property rights, and the characteristics of inflation and deflation are more excellent.
  9. The machine adopts humanistic design which makes operation more convenient, and it has passed the test of bio-compatibility.
  10It adopts patient protection system, it will automatically protect the patients when an early extra systole, power outage occurs and heart rate goes out of range, etc.
  11. It adopts special noise reduction and heat dissipation system, and the indexes of the whole machine are much better than National Standard and even to be on a PAR with American machine.
  
  Technical Parameter
  ECG Amplifier
  Input impedance: >2MΩ
  Common-mode rejection ratio: >80dB
  Bandwidth: 1-20 Hz on display
  SpO2 Oxygen Saturation
  Oxygen saturation range: 0 to 100%
  Accuracy SpO2 (± 1 Saturation Deviation)
  60-100% ± 3 digits for adults
  Using the Finger Clip Sensor
  60-100% ± 4 digits using Ear Clip Sensor
  Triggering Method
  External trigger: R-wave of patient ECG
  External trigger ratio: 1: 1 or 1: 2
  ECG triggers range: 35-125 ± 1 bpm
  
  Filter Technique
  Low-pass digital filter eliminates 50/60Hz and high-frequency interference
  Treatment Pressure Range
  Adjust from 100-300 mm Hg by PC as needed
  Cuffs
  Calves, lower thighs, and upper thigh/buttocks
  (You can choose upper limb cuffs too)
  Treatment Session Timer
  Set treatment time from 15 to 60 minutes maximum. System automatically stops when set time expires.
  System Protection
  Three circuit breakers -Mains and Compressor, and an emergency stop.
  Electrical Performance & System Dimension
  
  Power Requirements:
  220V± 22V AC, 50/60Hz, 1350W
  Dimension: 2150mm× 760mm× 600mm
  Net Weight 178 kg
  Operating Environment
  Temperature 14 to 104 (-10° C to 40° C )
  Relative Humidity <80% (no condensation)
  Atmospheric Pressure 700 to 1060 hPa
  Atmospheric Free of corrosives gas
  Transport and Storage Environment
  Temperature 14 to 140 (-10 ° Cto 60° C)
  Relative Humidity 30 to 85% (no condensation)
  Atmospheric Pressure 500 to 1060 hPa
  Atmospheric Free of corrosive gas