Home > Selling Leads > disposable infusion pump with PCA
- disposable infusion pump with PCA (Jiangsu)
-
Send Inquiry | 
Add to Favorites | 
PrintProduct Name: disposable infusion pump with PCA 
Product Categories: Disposable Medical Supplies Post Date: May 25,2012 Expiry Date: May 25,2013 Description: Disposable transfusion pump The disposable transfusion
pump made by the Huadong Medical Appliance factory is a
kind of small , light and portable medical appliance
without electricity as power but depending on the ball in
the pressure pump as power to inject the medical liquid to
the ball in a certain speed .It works without making noise
and it is specially suitable for the operation and after
operation and for the cancer patients to ease pain .It is
excellent for the woman when they are laboring the baby.
Structure , property and specification of the disposable
transfusion pump The disposable transfusion pump
hereinafter called transfusion pump is a kind of device
which use the bounce of liquid ball as the power to inject
the micro dose of medicine liquid to the patient via the
micro hole tube to limit the speed of the medicine liquid
in an average continues and safety way. The typical
transfusion pump is made of the single way valve and three
way valve with medicine liquid and liquid ball (bounce
device which can hold medical liquid ), medicine liquid
filter , device of the liquid flow speed controlling, the
liquid input self controlling device (can be cancelled if
you don’t need it),pipeline and cone shaped joint etc.
There are two kinds of types according to the type of the
liquid input. They are the type of the continues liquid
inputting (CBI), continuous liquid inputting +self
controlling liquid inputting .The pump is more scientific
and reasonable and a better curing result because the pump
can input the medicine liquid to the patient in micro
dose , continuous and average speed .This greatly improved
the life quality of the patient and curing quality and
plays a great role in reducing workload for the doctors
and nurses. Usage and the scope The transfusion pump
mainly uses the pain ease medicine to reduce and eliminate
the pain after operation and the pain of the cancer
patients ,pain when woman laboring baby and also the pains
caused by the other factors. It is helpful to heal up the
wound and reduce the complication and the other symptoms
caused by the other pain. Parameter of the liquid A.
Rating capacity :100ml, 150ml, 200ml, 250ml: B. Rating
flow capacity:1.0ml/h, 2.0ml/h, 3.0ml/h, C. effective
input liquid capacity: 92% D. liquid input capacity for
self-controlling type(if there is device of the input self
controlling) 0.5ml/time E. interval time for the self-
controlling type (if there is device of the self
controlling )15min+3min. Usage method: 1. Choose the
suitable pump according to the medicine liquid dose and
the package .Tear package bag along the opening line to
take out the transfusion pump and check to see if each
part is connected well. 2. inject the medicine liquid to
the ball .If it is the three way valve, it should make the
rotating stopper of the three way valve to the position
which can connecting the inputting medicine mouth to the
liquid ball(device of storage of the medicine liquid).Put
the medicine liquid to the liquid ball of the transfusion
pump with the sterilized syringe without needle .Check and
confirm that no medicine liquid flow out .Cover the
protection stopper of the medicine liquid opening mouth
(If it is the three way valve)and the rotating stopper of
the three valve should be adjusted to the close position.
3. open the protection cover of the pipeline and connect
it with the wing-shaped needle (or the joint of the
anaesthia tube )and if the three way valve is
available ,connect the rotating stopper of the three way
valve with the pipeline to put the medicine liquid into
the human body to implement the function of the ease
pain. . caution and instruction 1. It is not suitable for
kids to use . 2. Because the long time injection of the
medicine liquid , the location of the injection should be
fixed well so as to avoid leakage of the medicine liquid
due to the collision by accident during the time when
injection of the liquid. 3. This product is sterilized by
the ETO and there is mark of the ETO on the package and
the valid time is 2 years .Before we use it we should
check the production lot on the package seal line to see
if it is within the valid date and at the same time we
should also check to see if the package is well and if
find any damage we should not use it . 4. There is a mark
of the disposable products on the package to remind our
consumer that this products can only be used once and
should be destroyed after we used it and it is prohibited
to use it repeatedly. 5. This products should be put in
the room where it is both dry and good ventilation without
any corruption material 6. The said caution and the
instruction are for reference only for the doctors and
nurses in clinic service. A, Instruction of the common CBI
transfusion pump 1. the liquid medicine will flow out 6
minutes later after it is injected 2. Prepare the liquid
medicine according to the prescribe and the desired volume
needed. 3. take the medicine liquid with the syringe as it
shows in figure one demonstrated to pull out the cap of
the medicine injecting mouth 4. push the medicine liquid
in the syringe to the liquid ball of the pump 5. pull out
the syringe immediately if use the 20ml syringe and this
can be operated several times until the medicine liquid
reach the volume you needed and it will be ready to use
after the medicine liquid flow out. B. The instruction of
the self control by the patients of CBI+PCA transfusion
pump 1. This product should be operated under the
instruction of the doctors. 2. The medicine liquid will
flow out about 30 minutes after it was injected into the
ball. 3. Take out volume of the medicine liquid the
patient needed with the syringe as show in the figure two
4. push the medicine liquid in the syringe to the ball of
the transfusion pump. 5. pull out the syringe immediately
after the medicine liquid was injected and this can be
operated several times until reached the desired volume of
the medicine liquid needed .Press the button several times
5 minutes later and it can be used after the air in the
tube is expelled from the tube when the medicine liquid
flow out. 6. The hand control bottom can be used after 15
minutes interval and the volume is 0.5ml/time C. The
instruction of the self control by the patients of CBI A
Type +PCA transfusion pump 1. This products should be
operated under the construction of the doctors 2.The
medicine liquid will flow out about 30 minutes after it
was injected into the ball. 3. Take out the medicine
liquid the patient needed with the syringe as show in the
figure two. 4.push the medicine liquid in the syringe to
the ball of the transfusion pump. 5.pull out the syringe
immediately after the medicine liquid was injected and
this can be operated several times until reached the
desired volume of the medicine liquid .Press the button
several times 5 minutes later and it can be used after the
air in the tube is expelled from the tube when the
medicine liquid flow out. 6. The handle of the controlling
bottom is usually put in the position “ on” and upward
means off while downward means on . The hand control
bottom can be used after 15 minutes interval and the
volume is 0.5ml/time D. Because the storage of the bag of
air cell is made of the special molecular of breathable
material and if the air cell has some air bubble, it can
be automatically expelled out 3-5 hours later as it has
the function of the expelling the air and it is no need to
expel the air by hand. E. The speed of this pump is a
little faster than the rating speed at the beginning of
the first 3 hours but it will b resume in the normal speed
E. The rating speed and the time of the transfusion
depends on the distilled water and the temperature in the
room, the flowing speed varies from 10%-15% based on the
density of the medicine liquid, the working temperature
and the volume of the medicine liquid storage and the
other factors etc. F. This transfusion pump should be work
under the temperature of 20+_3 .Please .Please pay
attention to read the instruction of the rating
temperature carefully before using. It will be much more
better if the working temperature is same or close to the
rating temperature. Don’t use it if the medicine liquid
doesn’t flow or leak G. Please fill the curing card
seriously in order to analyse the patient case better and
to adjust the prescription to secure the need and safety
for the
Company: Yangzhou Yada Industrial Group Co.,Ltd [ Jiangsu ] Address: 218 Kai Fa West Road Yangzhou Jiangsu China Contact: Liu Yi Luan Tel: 0086514-85106592 Mobile: 0086-13952595975 Fax: 0086-514-85106166 Email: yadagroup8888@126.com Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by Department staff, and are subject to change without notice to you. The ChinameDevice.com makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. Our suggestion: In order to ensure your interest, we suggest registering as our gold suppliers.
- See more selling leads from this Gold Supplier:
- Browse By Category
-
- Restorative Devices
- Ear, Nose and Throat Devices
- Intraocular, Cornea and Neuromaterials Implants
- Other Devices
- Pacing, Defibrillator and leads
- Cardiac Electrophysiology & Monitoring Devices
- Orthopedic Devices
- Neurodiagnostic and Neurotherapeutic Devices
- Plastic & Reconstructive Surgery Devices
- Dental Devices
- Diagnostic Devices
- Obstetrics & Gynecology Devices
- Gastroenterology and Renal Devices
- Interventional Cardiology Devices
- Peripheral Vascular Devices
- Radiological Devices
- Infection Control Devices
- Urology and Lithotripsy Devices
- Anesthesiology and Respiratory Devices
- General Hospital Devices
- Physical Therapy devices
- Circulatory Support and Prosthetic Devices
- General Surgery Devices
