Home > Selling Leads > One step test for CK-MB/cTnI/Myo (Colloidal Gold)
- One step test for CK-MB/cTnI/Myo (Colloidal Gold)(Jiangsu)
-
Send Inquiry | 
Add to Favorites | 
PrintProduct Name: One step test for CK-MB/cTnI/Myo (Colloidal Gold) 
Product Categories: Medical Equipment Manufacturing Equipment Post Date: Jan 08,2013 Expiry Date: Jan 08,2014 Description: Payment Method: T/T L/C
Intended Use:
One Step Test for CK-MB/cTnI/Myo (Colloidal Gold) applies
colloidal gold immunochromatography to detect CK-
MB/cTnI/Myo in serum and plasma samples semi-
quantitatively or quantitatively.
The Test Strips contain:
Sample pad, colloidal gold pad (sprayed by colloidal gold-
labelled CK-MB/cTnI/Myo monoclonal antibody),
chromatography membrane (T-line coated with CK-MB/cTnI/Myo
monoclonal antibody, C-line coated with IgG), absorbent
paper and lining.
Kit contains:
1. Foil bag contains one test card, one pipette and one
desiccant 10 or 25
2. Manual 1
3. Standard Colorimetric Card 1
Matching Equipment: FIA8000 Series Quantitative
Immunoassay Analyzer
Storage Requirements:
1. Store the strip at 4~30oC within 12 months.
2. Use the test card within 1 hour once the foil bag is
opened.
Sample Material and Volume:
Serum/plasma 120 μl
Specimen Collection and Preparation:
1. A serum or plasma specimen is required for testing by
this product.
2. The plasma specimen is suggested to use heparin as
anticoagulant.
3. Transport specimens at room temperature or chilledly
and avoid extreme temperatures.
4. It is recommended to avoid using severely hemolyzed
specimens whenever possible, if a specimen appears to be
severely hemolyzed, another specimen should be obtained
and tested.
5. Test blood specimens on the strips immediately or
within 2 hours after collected, if testing can’t be
completed within 2 hours, the blood specimens must be
stored at 4oC and used within 1 day. The serum or plasma
specimen can be stored at -20oC (half a year at most)
until testing.
6. The blood specimens must be restored to room
temperature before testing.
Test Procedure:
1. Restore the test card and the blood specimen to room
temperature (20~25oC better).
2. Open the pouch and label the strip with the patient
specimen number.
3. Use the pipette to transfer blood from a sample
collection tube.
4. Release the bulb slowly, dropping 3 to 4 drops (or 120
μl) of the sample.
5. Referring to the standard colorimetric card, get the
semi-quantitative result by eye, or read the quantitative
result with the matching equipment. The result must be
read within 10~30 mins.
Company: Getein Biotechnology Co., Ltd. [ Jiangsu ] Address: No.9 Bofu Road,Luhe District,Nanjing,211505,China Contact: Fiona Tel: +86-25-68576663 Mobile: Fax: Email: per.service003@hotmail.com Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by Department staff, and are subject to change without notice to you. The ChinameDevice.com makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. Our suggestion: In order to ensure your interest, we suggest registering as our gold suppliers.
- See more selling leads from this Gold Supplier:
- Browse By Category
-
- Restorative Devices
- Ear, Nose and Throat Devices
- Intraocular, Cornea and Neuromaterials Implants
- Other Devices
- Pacing, Defibrillator and leads
- Cardiac Electrophysiology & Monitoring Devices
- Orthopedic Devices
- Neurodiagnostic and Neurotherapeutic Devices
- Plastic & Reconstructive Surgery Devices
- Dental Devices
- Diagnostic Devices
- Obstetrics & Gynecology Devices
- Gastroenterology and Renal Devices
- Interventional Cardiology Devices
- Peripheral Vascular Devices
- Radiological Devices
- Infection Control Devices
- Urology and Lithotripsy Devices
- Anesthesiology and Respiratory Devices
- General Hospital Devices
- Physical Therapy devices
- Circulatory Support and Prosthetic Devices
- General Surgery Devices
