Medical devices/General Hospital Devices - Dailymag Magnetic Technology(Ningbo)Limited/IT

Medical Linear Actuator (AT Series)

Classificazione:	Medical devices/General Hospital Devices
Descrizione del prodotto:	Specification of AT Series Linear actuators: 1. Max. Thrust 8000N, Max. Pull 5000N 2. Voltage: 24VDC or 12VDC, Permanent Magnet Motor Drive 3. Chrome Plated Piston Rod eye with slot 4. High Strength Plastic Housing and Gears 5. Elegant and compact design with small installation size 6. Standard protection class: IP 54 7. Built-in integral limit switch, not adjustable after leaving factory 8. Scratch and wear-resistant powder 9. Painting on outer tube Φ 30mm 10. Stainless Steel Back Fixture 11. Strong wear and corrosion resistant stainless steel inner rod 12. Standard Stroke: 100/150/200/250/300/350/400 mm, special stroke are available according to customer' requirement. 13. Duty cycle: 10%, comment: 2 minutes continuous work followed by 18 minutes rest 14. Ambient temperature -5° C (23F) to +40° C (104F) 15. Low noise design, dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear actuator is unloaded. 16. Overload protection 17. CE Certificated 18. Availability in Black, White and Blue housing.

Classificazione:

Medical devices/General Hospital Devices

Descrizione del prodotto:

Specification of AT Series Linear actuators:
1. Max. Thrust 8000N, Max. Pull 5000N
2. Voltage: 24VDC or 12VDC, Permanent Magnet Motor Drive
3. Chrome Plated Piston Rod eye with slot
4. High Strength Plastic Housing and Gears
5. Elegant and compact design with small installation size
6. Standard protection class: IP 54
7. Built-in integral limit switch, not adjustable after leaving factory
8. Scratch and wear-resistant powder
9. Painting on outer tube Φ 30mm
10. Stainless Steel Back Fixture
11. Strong wear and corrosion resistant stainless steel inner rod
12. Standard Stroke: 100/150/200/250/300/350/400 mm, special stroke are available according to customer' requirement.
13. Duty cycle: 10%, comment: 2 minutes continuous work followed by 18 minutes rest
14. Ambient temperature -5° C (23F) to +40° C (104F)
15. Low noise design, dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear actuator is unloaded.
16. Overload protection
17. CE Certificated
18. Availability in Black, White and Blue housing.

Contact Info
Selling Leads | Products

Nome della società:	Dailymag Magnetic Technology(Ningbo)Limited
Regione:	China/Zhejiang
Contatto:	Mr. Charles Yao
Tel:	86-574-27721335, 27721558
Contatto Fax:	86-574-27721337
Sito web:	http://www.cndailymag.com
Indirizzo:	15F, No. 777, Zhongguan West Road, Zhenhai, Ningbo, Zhejiang, China
Codice postale:	315201