| Descripción del producto: |
Model#:EV-806A
The EV-806A DIGITAL TENS/EMS is a battery operated pulse generator that sends electrical impulses electrodes to the body and reach the nerves and underlying muscle group. This unit is a combination stimulator of TENS and EMS which can be used for muscle stimulation and pain relief. The device is provided with two controllable output channels, each independent of each other. An electrode pair can be connected to each output channel. The intensity controls are protected by a cap to avoid accidental touch. The settings are controlled by press buttons. | MECHANISM | TECHICAL DESCRIPTION | 01 | Channel | Dual, isolated between channels | 02 | Pulse Amplitude | Adjustable 0-90 mA into 500 ohm load each channel. | 03 | Wave Form | Asymmetrical Bi-Phasic Square Pulse | 04 | Voltage | 0 to 45V (Load: 500 ohm) | 05 | Power source | One 9 Volt Battery. | 06 | Size | 10.1cm(L) x 6.1cm(W) x 2.45cm(H) | 07 | Weight | 150 grams with battery. | 08 | Pulse Rate | Adjustable, from 2 to 150 Hz, 1 Hz/step | 09 | Pulse Width | Adjustable, from 50 to 300 microseconds, 10 μs/step | 10 | On Time | Adjustable, 2~90 seconds , 1 Sec./ step | 11 | Off Time | Adjustable, 2~90 seconds , 1 Sec./ step | 12 | Ramp Time | Adjustable, 1~8 seconds, 1 Sec./ step, The ?n?time will increase and decrease in the setting value. | 13 | Mode | Five TENS Modes: B(Burst), N(Normal),M (Modulation),SD1( Strength Duration), SD2
Three EMS Modes: C(Constant)
S (Synchronous), A (Alternate) |
|
|
DE
JP
KR
RU
IN
FR
ES
IT