MECHANISM

TECHICAL DESCRIPTION

01

Channel

Dual, isolated between channels

02

Pulse Amplitude

Adjustable 0-80mA, Max output 80mA peak to peak (21.2mA rms) into 500ohm load each channel.

03

Output Voltage

Adjustable 0-40V, Max output 40V peak to peak (10.6V rms) into 500ohm load each channel.

04

Wave Form

Asymmetrical rectangular biphasic pulse

05

Power Supply

One 9 Volt Battery, type 6F22

06

Size

10.5cm(L) x 6.2cm(W) x 3.72cm(H)

07

Weight

140 grams (battery included)

08

Pulse Rate

Adjustable, 2~150 Hz

09

Pulse Width

Adjustable, 30~260μs

10

Mode

4 modes, B,N, M1, M2(Burst, Normal, Pulse width modulation and Pulse rate modulation)Selected by press button.

11

Burst

Burst rate 2 Hz
Pulse width adjustable, 30~260μs
Frequency fixed = 100 Hz

12

Normal

Continuous output based on setting value.

13

M1 Width Modulation

Pulse width is automatically varied in a cyclic pattern over an interval of nominally 10 seconds. (in max 260μs)Pulse width decreases linearly over a period of 4 seconds from the control setting value to a value which is 60% less. The narrower pulse width will continue for 1 second. Then increase linearly over a 4 seconds period to its original value. The original pulse width will continue for 1 second.The cycle is then repeated.

14

M2 Rate Modulation

Pulse rate is automatically varied in a cyclic pattern over an interval of nominally 10 seconds. (in max 150Hz) Pulse rate decreases linearly over a period of 5 seconds from the control setting value to a value which is 40% less. Then increase linearly over a 5 seconds period to its original value. The cycle is then repeated.