Medical devices/General Surgery Devices - All Pro Corporation/IT

Infant Incubator (QY-BB-100)

Classificazione:	Medical devices/General Surgery Devices
Descrizione del prodotto:	Infant incubator (standard) Function features: Microprocessor based servo controlled Temperature system Temperature displayed by LED Alarm functions: Power failure; Over temperature; Temperature deviation; Temperature sensor failure; Fan failure; >37º C temperature setting A keypad lock prevent inadvertent changes The setting A second thermal cut-off function for more safety Humidity is adjustable in two grade Heating power displayed on panel The infant bed inclination angle is adjustable Trough for pulling and pushing, which is Convenient to add water and wash Fan with low noise and long life-span Temperature deviation and over temperature Could be amended in front panel directly Slience/reset button for alarms Six operating windows, two sides access Operating windows can be swiveled Support bracket Heater is electrically cut-out if air temperature Inside incubator exceed 40º C Standard configuration Main body(including the transparent hood, Control system, infant bed, water trough), I. V. Pole, Mattress, support bracket, castors. Optional parts: Phototherapy up side unit; Phototherapy from up and down sides; RS232(485)conncector; Tray/pole; Infant bed pulled from side door; Infant bed pulled from side and front door; Double wall hood. Technical data: Power supply: AC110/220V 60/50Hz Power input: ≤ 420VA Optional parts: Environment temperature: 20º C~30º C Environment relative humidity: 30%~75%RH Environment air velocity of flow: <0.3m/s Air Temperature control range: 25º C~38º C Temperature fluctuation: +0.5º C Uniformity of mattress temperature: ≤ 0.8º C Humidity accuracy: ≤ 10%RH Warm-up time: ≤ 45min Internal noise level: ≤ 55dB Infant bed tilt angle: +10º C Mattress size: 65cm(L)× 37cm(W) Trough capacity: 1200ml Air filter: 0.5um Package: Each unit is packed in one wooden crate: Size: 110× 78× 86cm N. W.: 72Kg G. W.: 102Kg Transport and storage Environment Temp: -40º C--+55º C Environment Relative Humidity: ≤ 95% Atmospheric Pressure: 500~1060Hpa

Classificazione:

Medical devices/General Surgery Devices

Descrizione del prodotto:

Infant incubator (standard) Function features: Microprocessor based servo controlled Temperature system Temperature displayed by LED Alarm functions: Power failure; Over temperature; Temperature deviation; Temperature sensor failure; Fan failure; >37º C temperature setting A keypad lock prevent inadvertent changes The setting A second thermal cut-off function for more safety Humidity is adjustable in two grade Heating power displayed on panel The infant bed inclination angle is adjustable Trough for pulling and pushing, which is Convenient to add water and wash Fan with low noise and long life-span Temperature deviation and over temperature Could be amended in front panel directly Slience/reset button for alarms Six operating windows, two sides access Operating windows can be swiveled Support bracket Heater is electrically cut-out if air temperature Inside incubator exceed 40º C Standard configuration Main body(including the transparent hood, Control system, infant bed, water trough), I. V. Pole, Mattress, support bracket, castors. Optional parts: Phototherapy up side unit; Phototherapy from up and down sides; RS232(485)conncector; Tray/pole; Infant bed pulled from side door; Infant bed pulled from side and front door; Double wall hood. Technical data: Power supply: AC110/220V 60/50Hz Power input: ≤ 420VA Optional parts: Environment temperature: 20º C~30º C Environment relative humidity: 30%~75%RH Environment air velocity of flow: <0.3m/s Air Temperature control range: 25º C~38º C Temperature fluctuation: +0.5º C Uniformity of mattress temperature: ≤ 0.8º C Humidity accuracy: ≤ 10%RH Warm-up time: ≤ 45min Internal noise level: ≤ 55dB Infant bed tilt angle: +10º C Mattress size: 65cm(L)× 37cm(W) Trough capacity: 1200ml Air filter: 0.5um Package: Each unit is packed in one wooden crate: Size: 110× 78× 86cm N. W.: 72Kg G. W.: 102Kg Transport and storage Environment Temp: -40º C--+55º C Environment Relative Humidity: ≤ 95% Atmospheric Pressure: 500~1060Hpa

Contact Info
Selling Leads | Products

Nome della società:	All Pro Corporation
Regione:	China/Shandong
Contatto:	Mr. Qian
Tel:	86-532-82850201
Contatto Fax:	86-532-82812299
Sito web:	http://www.allprocorporation.com
Indirizzo:	592#, Tonghe Road, Qingdao, Shandong, China
Codice postale:	266011