| Описание продукта: |
Voltage: 220V/50Hz
Power: 1000W
Demansion: 25x21x30cm
Weight: 6kg
1. Connect the machine with power 220V/50Hz; Check the status of vacuum motor and electric heating device.
2. Turn the upper cover 90° (from left or right side), put a film between upper and nether frame and switch the knob to close the frames tightly. Turn the upper cover back and push down the elevating wrench to elevate the frame to working position (there is a position holder on the principal axes). Then put the product in the middle of the sheet and switch on the heating device to heat the film. Switch off the heating device (about 2-3 minutes later), when the lower surface of the film is under the nether frame about 1cm. Switch the elevating wrench to set down the frame and turn on the vacuum motor, take the product out after forming.
Below is the structure of the machine for reference.
Trademark:
Iris
Model NO.:
AE-Y01
Productivity:
100pcs/ month
Origin:
China
Packing:
carton or wooden
Min. Order:
1set
Transportation:
air: ship
Company:
Tianjin Iris International Trade Co., Ltd. |
DE
JP
KR
RU
IN
FR
ES
IT