Disposable Medical Supplies - Jiangsu Jichun Medical Devices Co.,Ltd/JP

Infusion Set for Single Use

分類:	Disposable Medical Supplies
製品概要:	General specifications They are suited to hard containers and to soft bags (for the first, use I. V. Sets with air inlet). Easy and exact rate thanks to the flow regulator. Bacteriostatic filter (porosity 0. 2 micron) Length of the tubing between 130 and 180 cm., depending from the models. Main accessories: Vented spike, Dripping Chamber, Solution Filter, Roller Clamp, latex tube, Luer Lock Adapter, Hypodermic needle. Components specifications Protective cap for closure piercing device made of polyethylene with internal thread that prevents the bacteria from coming in, but allows the entrance of ETO gas. Closure piercing device made of white PVC, with sizes according to ISO 1135-4 standards. Water-repellent filter, polypropylene support + hydrophobic filtering paper, made of acrylic resin and nylon. ON/OFF Cap: Red polypropylene. Drip chamber made of soft PVC, sizes according to the ISO 8536-4 standards. Fluid filter support made of polyethylene + nylon net. Net opening 15 micron. Flow Regulator made of polyethylene. Tubing made of soft medical grade PVC, minimum internal diameter 2.7mm Terminal fitting protective cap (luer slip or Luer-lock adapter upon request) made of PVC or polystyrene, according to the ISO 594/1 and 594/2 standards. Terminal fitting protective cap made of polyethylene. Sterilization method Ethylene oxyde 10 % + CO2 90 % validated cycle according to the EN 550 stan.

分類:

Disposable Medical Supplies

製品概要:

General specifications They are suited to hard containers and to soft bags (for the first, use I. V. Sets with air inlet). Easy and exact rate thanks to the flow regulator. Bacteriostatic filter (porosity 0. 2 micron) Length of the tubing between 130 and 180 cm., depending from the models. Main accessories: Vented spike, Dripping Chamber, Solution Filter, Roller Clamp, latex tube, Luer Lock Adapter, Hypodermic needle. Components specifications Protective cap for closure piercing device made of polyethylene with internal thread that prevents the bacteria from coming in, but allows the entrance of ETO gas. Closure piercing device made of white PVC, with sizes according to ISO 1135-4 standards. Water-repellent filter, polypropylene support + hydrophobic filtering paper, made of acrylic resin and nylon. ON/OFF Cap: Red polypropylene. Drip chamber made of soft PVC, sizes according to the ISO 8536-4 standards. Fluid filter support made of polyethylene + nylon net. Net opening 15 micron. Flow Regulator made of polyethylene. Tubing made of soft medical grade PVC, minimum internal diameter 2.7mm Terminal fitting protective cap (luer slip or Luer-lock adapter upon request) made of PVC or polystyrene, according to the ISO 594/1 and 594/2 standards. Terminal fitting protective cap made of polyethylene. Sterilization method Ethylene oxyde 10 % + CO2 90 % validated cycle according to the EN 550 stan.

Contact Info
Selling Leads | Products

会社名:	Jiangsu Jichun Medical Devices Co.,Ltd
地域:	China/Anhui
コンタクト:	Mr. Beni Yu(Sales Department)
電話番号:	86-13685225863
お問い合わせファックス:
ウェブサイト:
アドレス:	Zhenglu Town, Changzhou, Jiangsu, China
郵便番号:	213111