Others - Wenzhou Weike Biology Laboratory Equipment Co.,Ltd/RU

ZW-2008 Germ Collector

Классификация:	Others
Описание продукта:	Brief Introduction ZW-2008 germs collector is the main part of ZW sterility test system. The whole body is designed by L304 stainless steel which meets the requirements of medicine instruments in classified room. It is antirust which extend the machine's lifespan and reduced the costs caused by maintenance and fixing. No sanitation blind angle on the surface avoids chemical's corrosion. Work principle The sample is extracted into the filter units under the peristaltic pump's correctional pressure. The microorganism in the sample is withheld on the Millipore membrane whose aperture is 0.22um or 0.45um. Rinsing the membrane to get rid of anti-microbial components and then inject the needed culture media into the incubator. Incubate under proper conditions to see if there is any germs grow and check whether the test article comply with the requirements of pharmaceutical standard. Main features 1. New type pump head: Filter more smoothly, evenly and safely. 2. Pre-settled stalls design: With"40R""60R""160R""240R" four stalls meets the requirements of different volumes samples such as bulky injection, powder remedy, aqueous solutions and other kinds of preparations. 3. Separate drainage flume can be moved freely. Meets the habits of operators. Arc inside the flume which solved the problem of contamination from residue waste after many times of tests. 4. Bottle-shaped frame eliminates the troubles caused by the traditional big-bottle frame and small-bottle frame. And also saved the risk of bottles' falling. The bottle-shaped frame will fix the bottles firmly which is secure and beautiful. 5. Cycle bayonet design: The traditional angle bayonet brings a lot of troubles when install the soft tube, and sometimes even tear the tube which causes economic losses. But now with the cycle bayonet, you can easily install the tube with light fasten. 6. Integration switches design: Avoid too much holes on the surface that keep the body clean. 7. Ergonomically designed wrench, you can fasten the tube easily. 8. Adding a footswitch make the test more convenient. Technical parameters Power supply: AC220V/50Hz Power: 120W Rev: 0~240rpm Height of hanger: 37cm Weight: 15kg Shell material: L304 Stainless steel Dimension: 42× 26× 12cm Appliance for 1. Pharmaceutical industrial: The sterility test and microorganism limit test in purified water, injection solutions and other aseptic instruments (bulky injection, mille injection, powder remedy, biological products, blood products, ophthalmic solutions, etc. ) 2. Medicine instrument industrial: The sterility test and microorganism limit test in purified water, injection liquid, syringes, infusion, blood-transfusion, vein-catheter tubes, etc. 3. Food, drinking industrial. 4. Environmental protection industrial.

Классификация:

Others

Описание продукта:

Brief Introduction
ZW-2008 germs collector is the main part of ZW sterility test system. The whole body is designed by L304 stainless steel which meets the requirements of medicine instruments in classified room. It is antirust which extend the machine's lifespan and reduced the costs caused by maintenance and fixing. No sanitation blind angle on the surface avoids chemical's corrosion.

Work principle
The sample is extracted into the filter units under the peristaltic pump's correctional pressure. The microorganism in the sample is withheld on the Millipore membrane whose aperture is 0.22um or 0.45um. Rinsing the membrane to get rid of anti-microbial components and then inject the needed culture media into the incubator. Incubate under proper conditions to see if there is any germs grow and check whether the test article comply with the requirements of pharmaceutical standard.

Main features
1. New type pump head: Filter more smoothly, evenly and safely.
2. Pre-settled stalls design: With"40R""60R""160R""240R" four stalls meets the requirements of different volumes samples such as bulky injection, powder remedy, aqueous solutions and other kinds of preparations.
3. Separate drainage flume can be moved freely. Meets the habits of operators. Arc inside the flume which solved the problem of contamination from residue waste after many times of tests.
4. Bottle-shaped frame eliminates the troubles caused by the traditional big-bottle frame and small-bottle frame. And also saved the risk of bottles' falling. The bottle-shaped frame will fix the bottles firmly which is secure and beautiful.
5. Cycle bayonet design: The traditional angle bayonet brings a lot of troubles when install the soft tube, and sometimes even tear the tube which causes economic losses. But now with the cycle bayonet, you can easily install the tube with light fasten.
6. Integration switches design: Avoid too much holes on the surface that keep the body clean.
7. Ergonomically designed wrench, you can fasten the tube easily.
8. Adding a footswitch make the test more convenient.

Technical parameters
Power supply: AC220V/50Hz
Power: 120W
Rev: 0~240rpm
Height of hanger: 37cm
Weight: 15kg
Shell material: L304 Stainless steel
Dimension: 42× 26× 12cm

Appliance for
1. Pharmaceutical industrial: The sterility test and microorganism limit test in purified water, injection solutions and other aseptic instruments (bulky injection, mille injection, powder remedy, biological products, blood products, ophthalmic solutions, etc. )
2. Medicine instrument industrial: The sterility test and microorganism limit test in purified water, injection liquid, syringes, infusion, blood-transfusion, vein-catheter tubes, etc.
3. Food, drinking industrial.
4. Environmental protection industrial.

Contact Info
Selling Leads | Products

Название компании:	Wenzhou Weike Biology Laboratory Equipment Co.,Ltd
Область:	China/Zhejiang
Контакт:	Miss Wang(International Ma
Телефон:	86-577-86990822
Факс контактного лица:	86-577-86990922
Веб-сайт:	http://www.zjweike.com
Адрес:	No.108 Street 5, Ave. 2, Binhai Industry Zone, Wenzhou, Zhejiang, China
Почтовый индекс:	325024