| 製品概要: |
Flu A/B rapid test kit (Colloidal Gold Immunochromatographic Strip Assay)
INTENDED USE
The Flu A/B rapid test kit (Colloidal Gold Immunochromatographic Strip Assay) is to be used for detecting Flu A/B virus in nasal cavity secretion
Any serotype of Flu A/Bvirus could be identified by the assay
PRINCIPLE OF THE TEST
One McAb specific to Flu A/B virus nucleoprotein was immobilized at the Test region of the nitrocellulose strip and a goat anti-mouse IgG is dispensed at the Control region of the strip
The other one McAb specific to Flu A/B virus nucleoprotein linked to colloidal gold was impregnated on the gold pad, placed between the sample pad and the nitrocellulose membrane
The assay is initiated by applying the sample to the Sample Port of the test cassette. The subsequent addition of three to four drops of sample buffer facilitates the flow of the specimen into the cassette and onto the test strip
If the specimen contains Flu A/B antigens, a red Test Line along with a red Control Line will appear on the Test Strip, indicating positive. Flu A/B antigens are not present, or at very low levels, only a red Control Line will appear
KIT CONTENTS
1. Colloidal gold strips (10)
2. Sample buffer (10)
3. Sterile swabs (10)
4. Disposable Droppers (10)
5. Operation instruction (1)
SPECIMEN COLLECTION
For proper test performance, use the swabs supplied in the kit.
To collect a nasal swab sample, insert the sterile swab into the nostril that presents the most secretion under visual inspection. Rotating gently, then push the swab, until the resistance met the level of the turbinates (less than one inch into the nostril). Rotate the swab a few times against the nasal wall.
Place patient's swab sample into the sample buffer. Roll the swab at least three times.
TESTING METHOD
1. All reagents should be warmed to room temperature before use.
3. Open aluminum foil bags, take out the test kit, put on a horizontal plane, suck three to four drops of nasal swab sample with the dropper, then add it to the Sample Port.
4. Record the result at 10 to 15 minutes, after 15 minutes record the result to be invalid or not.
RESULT EXPLANATION
Positive: A red Test Line (T) along with a red Control Line (C) appears.
Negative: Only a red Control Line (C) appears.
If no red line appears or only a red Test Line (T) appears in the examination area, you should check the product expiration date, and test again according to requirement of instruction with the product in validation.
LIMITATION
The result only takes as the assistance diagnostic tool, doctors should unify the laboratory inspection according to patient's clinical symptom to make the correct diagnosis.
PRECISION
The Flu A lowest determine precision should not be higher than 5*104TCID50/ 0.1mL
The Flu B lowest determine precision should not be higher than 2*105TCID50/ 0.1mL
ATTENTION
1. This test strip only to be used in external diagnosing
2. Expired or the expiration product cannot use
PACKING SPECIFACATION
10 strips /Kit
STORAGE
The test kit should be reserved at the room temperature(4-25 degree recommended)
TERM OF VALIDITY
10 months
PRICING
FOB China(Any port, Shanghai, Beijing, Guangzhou), 7.8USD/kit
More Product Features
Model NO.:
(Colloidal Gold Immunochromatographic Strip Assay)
Standard:
Flu A/B rapid test kit Colloidal Gold Immunochrom
Company:
China100A Technology Co., Limited |
DE
JP
KR
RU
IN
FR
ES
IT