| Descripción del producto: |
Tabletop Pulse Oximeter
Parameters:
Three Parameters: SpO2\TEMP(Optional)\Pulse Rate.
Waveforms: SpO2 waveform-PLETH
Features:
1. Compact, small, light, easy for carrying and handling;
2. LED display of measurement and LCD display of PLETH;
3. Audio and visual alarm;
4. Storage and review of patient's trend data up to 36 hours which is never lost even when power's off;
5. Three kinds of power supply, AC Power, Build-in rechargeable Ni/MH battery and Common AA alkaline or rechargeable batteries;
6. Battery capacity indicator;
7. Automatic power-off;
8. Patient's trend can be transmitted to a personal computer for display, saving and printing;
9. Suitable for adult, pediatric, and neonate patients;
Applications:
Table Pulse Oximeter can be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.
Technical specification
1. General
Monitoring Parameters: SpO2\PR\PLETH\Pulse strength\TEMP(Optional)
Signal sockets: SpO2 socket\PR socket\TEMP socket(Optional)\adaptor socket\PC communication socket
Display screen:
Type: 128× 64 DOT matrix homochromy LCD and Dual-color LED (red/green)
LCD Display area: 46mm× 32mm
LED Display area: 35mm× 58mm
Backlight color: White
LED: Dual-color LED (red/green) and homochromy LED
2. Features
PLETH: The monitor can display PLETH waveform
Audio and visual alarm: The speaker sounds the alarm and the parameter's measurement flashes on the screen.
Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.
Power saving: The monitor will automatic shut down when no monitoring for 3 minutes.
Trend: The monitor saves parameter measurements every 2 seconds and can store trend data up to 36 hours.
Data storage: The saved data will never be lost even if the monitor is powered off.
Communication: Transmitting the patient's trend to a PC for display, observation, saving and printing.
3. Electrical specifications
Working Voltage: DC 6.0V~9.0V
AC power adaptor
Input: AC 100~240V, 50/60Hz, 0.7A
Output: DC 5V, 3A
Internal battery
Type: 1.5Ahr/8.4V Li rechargeable battery
Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25)
Recharge time: 5 hours
Common 1.5V Battery
Type: Five pieces of common 1.5V AA battery or rechargeable battery
Run Time: More than 5-hour continuous operation with a new battery (environment temperature is 25)
4. Environment
Temperature
Operation: 0° C ~ 45 ° C
Transportation and storage: -20 ° C ~ 60 ° C
Humidity
Operation: 15% ~95 %(non-condensing)
Transportation and storage: 10% ~ 95 % (non-condensing)
Altitude
Operation: 86KPa~106KPa
Transportation and storage: 50KPa~106KPa
5. Parameter Specifications
SpO2:
Patient: Adult, child and neonate
Range: 35%~100%
Resolution: 1 %
Accuracy: ± 2 %(70% ~100%), Unspecified (0%~ 69%)
PR:
Range: 30 bpm~250bpm
Resolution: 1bpm
Accuracy: ± 2bpm
TEMP(Optional):
Channel: 1
Input: Body surface thermal-sensitive resistor temperature sensor
Range: 0~50
Resolution: 0.1
Accuracy ± 0.2
Company:
Minmin Medical Instruments Co., Ltd. |
DE
JP
KR
RU
IN
FR
ES
IT