Translate :  China

Popular Searches : Shoe Cover , test tube , infusion pump , Tourniquet , latex surgical glove , feeding tube , sterilizer , disposable infusion more>>
Home > Products > ICU Ventilator
 KR

ICU Ventilator

ICU  Ventilator
  • Scope:used in emergency, ICU room, operation room and internal medicine etc.
  • Product Detials:

    Features
    12.1 inch TFT color screen , big screen could show more information.
    Screen could be rotated freely, suitable to operate in any angle and height
    With heater device to prevent water into ventilator
    Could show Paw-t、Flow-t、Volume-t、Paw-V、Flow-V five waveform at the same time, also could show one or several waveform according to our operation.
    Curve size ,time scale, pressure-flow ratio adjustable, watch the details more good.
    Curve pause function, could watch details.
    Flow, pressure two trigger function, could effect at a same time.
    Automatically inspiratory synchronous nebulizing function, nebulizing time adjustable;
    100% Oxygen inspiratory function, oxygen inspiratory time is adjustable.
    High, medium, low- grade alarm function;
    Alarm record functions, could record the last 100 pieces of information, show alarm grade, alarm time and the alarm parameter.
    Pressure, volume, time respiratory mode security, could inspect pressure in inspiratory phase, volume, time exceed the regulated value, turn into expiratory, ensure patient safety.
    Volume security function, keep the minimum tidal volume in pressure mode.
    Adjust MMV function automatic, adjust inspiratory pressure and breathing frequency, approaching the target tidal volume and minute ventilator.
    VGA connector could output the screen signal to other screen

    Specification

    perating Modes
    Volume Control Ventilation (VCV)
    Assisted/Controlled Pressure Control Ventilation (PCV),
    Assisted/Controlled Pressure Support Ventilation (PSV),
    SIMV(VCV)+PSV
    SIMV(PCV)+PSV
    Mandatory Minute Ventilation (MMV)
    Continuous Positive Airway Pressure(CPAP)
    Backup Apnea Ventilation                        

    Parameter
    Application scope: Pediatric and adult
    Driven mode: Pneumatically driven and electronically controlled
    Display:12.1 TFT screen
    Working mode: Pressure and volume
    Ventilation wave type: Squire wave, deceleration wave
    FiO2: 21% to 100%
    PEEP/CPAP: 0 to 40 cmH2O
    Inspiratory Sensitivity:
    Flow triggered: 0.5 to 20 L/min, OFF
    Pressure triggered: -1 to -20 cmH2O, OFF
    Tidal Volume: 20 to 2000 mL
    Breath frequency: 1 to 100 bpm
    I:E Ratio: 5.0 : 1 to 1 : 5.0
    Inspiratory plateau: 0 to 50%
    Inspiratory Flow Wave Shape(VCV): Rectangular wave and Decelerating wave
    SIGH: 1.0 to 2.0
    Breath frequency(SIMV): 2 to 40bpm
    Inspiratory time (SIMV): 0.1 to 12 S
    Pressure Support Ventilation (PSV): 0 to 40 cmH2O
    Expiratory Sensitivity for PSV : 10% to 75% of the initial flow
    Maximum Inspiratory time (PSV): 1.0 to 8.0 S
    Pressure Control Ventilation(PCV): 0 to 40 cmH2O
    Minimum Tidal Volume(PCV and PSV): 50 to 1500 mL
    Backup Rate (PSV): 2 to 40 bpm
    Object Tidal Volume(MMV): 20 to 2000 mL
    Ventilation volume(MMV): 0.5 to 40.0 L/min
    Nebulizer time: 30 minutes

    Monitoring
    Breathing wave: Pressure vs time curve,Flow vs time curve,Volume vs time curve,
    Pressure vs volume loops,Flow vs volume loops
    Expiratory tidal volume:,
    Breath frequency(bpm),
    PEEP:
    FiO2
    MV
    Insipiratory Tidal volume(TV_Insp):
    I:E ratio:
    Freq_indepen:
    MV_Indepen:
    Pmean
    Pflat:,
    Airway Pressure
    Ppeak,
    Minute Ventilation,
    Oxygen concentration

    Alarms
    High tidal volume alarm
    Low tidal volume alarm
    High minute ventilation alarm
    Low minute ventilation alarm
    High breathing frequency alarm
    Low breathing frequency alarm                               
    High peak pressure alarm
    Low peak pressure alarm
    High PEEP pressure alarm
    Low PEEP pressure alarm
    High oxygen concentration alarm
    Low oxygen concentration alarm
    Apnea time alarm
    Respirtory arrest alarm
    AC power fail alarm
    Air source Low pressure alarm
    Oxygen source low pressure alarm
    Battery disconnect alarm
    Low battery alarm
    Circle leakage alarm
    Circle block alarm

    POWER REQUIREMENT
    Main power: from 85 to 265VAC 47-63HZ
    AC/DC switch automatically
    Internal battery: 12VDC; 7AH
    Automatic recharge.
    Estimated duration: more than 2 hours when completely charged.
    The display shows an icon with the charge level.

    PNEUMATIC REQUIREMENT
    Oxygen: pressure 2.8 to 6 bar ISO5359 connector
    Air: pressure 2.8 to 6 bar ISO 5359 connector

    Why do you choose us ?
    A)Who we are?
    Vaporizer,Ventilator and portable anesthesia machine manufacturing specialist.
    The Biggest Anesthesia Vaporizer Producer In China.
    The Only Machining Center of China Anesthesia&Ventilator Parts Precessing System.

    B)Basmed Certificate CE0482 and ISO13485
    C)Basemed After Service
    Plz link to this:http://www.cnbasemed.com/Service-index.html
    Respond in 2 hours, solve the problem in 48 hours
    Training Course will be arranged freely at our office.
    Training at customer’s office is available
    10 years parts Service available.
    life-long free calibration service for basemed anesthesia vaporizer

    D)Who buy our products?
    Basemed products have export to more than 65 countries,the mainly market include:U.S,Germany,Poland,Romania,India, South Africa,Ukraine, Indonesia, Peru, Brazil, Jordan, Rwanda, Egypt, Australia etc.
    In China,we have build 17 offices,
    ICU Ventilator has been sold about 5000 units in the mainland market.
    Portable anesthsia machine has been sold about 2000 units
    Most anestheisa vaporizers from hospital are from basemed,we have supplied about one hundred thousand in the china market.

Inquiry About ICU Ventilator* is required.
 
Subject: *
Message: *
 
Company Name: *
Your Name: *
Business Phone: *
(Type: +86-571-88228426)
Fax:
Business Email: *
Zip:
Address:
CheckCode:      *

         
Contact Info
Company: Zhong ke Base Medical Technology(Beijing) Co.,Ltd
Area: China
Contact: Mike
Tel: 86-10-60801185
Fax: 86-10-80308084
Web site: www.cnbasemed.com
Add: No.74,Dazicaowucun South,Yancun Town,Fangshan District,Bejjing,102412,P.R.China.
Zip: 102412

Supplier's information
   Zhong ke Base Medical Technology(Beijing) Co.,Ltd

     Zhong ke Base Medical Technology(Beijing) Co.,Ltd(following is called Basemed), is one professo ..... more >>

Contact: Mike 

(how to become good suppliers?)

Other products from this supplier

>>More

View the similar products

>>Search More